A pumping station in a half mile deep mine. It pumps out 2400 gallons per minute. Pumping machinery at the station. Blades of a fan move. Stairs near the fans.
A central compressor plant in United States. Machinery of the plant includes huge wheels. The compressor plant supplies 60,000 cubic feet of free air per minute for drills.
Planes move in air. Riggers dive from plane. Many parachutes in sky. Riggers land on ground. An Army personnel watches riggers landing. Training session of paratroopers. Paratroopers doing push-ups under supervision. Paratroopers run on a road during training. They jump off from a 34 feet mock tower alone and then in a group of seven. The paratroopers are tied with safety ropes during these jumps. In the next part, paratroopers are trained to jump from a 250 feet tower. Next they jump from plane at a height of 1250 feet. It is then, the men qualify as paratroopers. Paratroopers receive wings during graduation ceremony and are assigned air-borne division. Two officials check documents. Arexy, Company Commander interviews Parker, a paratrooper.
Selected paratroopers are addressed by Director prior to their training as riggers. Director's speech includes brief summary of their 3 months training. Riggers are trained to lay out parachute without tangles. Parker, a rigger under training tries to lay parachute but cannot remove tangles. An instructor comes to help him and guides him to lay parachute properly. Riggers practice laying parachutes. Next, the Instructor guides them to pack parachutes. Parker along with other riggers pack parachute. All riggers are given parachutes. They lay and pack parachutes
Airplane in air. Riggers with their parachutes. They jump from the plane and open their parachute. Riggers land on ground. A rigger removes his parachute after landing. Riggers sitting in maintenance shed. An instructor guides them to operate sewing machine through a model. A light duty sewing machine is used to patch canopy of parachute. A part of parachute canopy patched is displayed. Parker, a rigger operates a heavy duty sewing machine to repair harness of the parachute. Suspension lines are sown on a zigzag sewing machine. Hook is attached on a parachute on a hook and eye attachment sewing machine. The rib-cord is reinforced on a bar tacking machine. Holes are darned in the parachute canopy on a darning machine. Riggers darn holes with hands. They also replace hooks and harness assemblies. Parker works in the maintenance shed on a table. He checks canopy and notes on a pad. He also checks the suspension lines and harness assembly.
Riggers sit in front of instructor. A G-11 parachute is handled by riggers. A fan blows the 100 feet canopy of G-11. Three riggers pack the G-11 parachute. They install it in the deployment bag. The instructor watches them. They work on suspension lines of the G-11. Two riggers work on air-drop containers. Riggers pack a 550 pounds capacity A-78 container. Riggers learn wing loading and door loading procedures. Cargo loaded on wing of a plane. Riggers load cargo through door of the plane. Riggers look out in the sky. A plane drops loads with and without parachute. Loads land on ground. Parker, a rigger drops a load from plane.
CRITICALPAST.COM: About Us | Contact Us | FAQs - How to Order | License Agreement | My Account | My Lightboxes | Shopping Cart | Advanced Search | Featured Collections | Website Terms & Conditions | Privacy Policy ©2026 CriticalPast LLC.
License Agreement |
Terms & Conditions |
Privacy Policy
©2026 CriticalPast LLC.